The Furman M-8x2 Rack Mount Power Conditioner is an ideal budget-friendly AC power solution for rack-mounted systems, with 8 switched outlets in the rear panel capable of protecting up to a 15-amp load. This power conditioner is intended for applications where lighting is not needed.

INSTRUMENT RIGS
Plugging your effects, preamps, and tuner into the wall can lead to one large power spike which can damage your rig. With Furman's M-8x2, you can rest assured as its standard-level surge/spike protection defends your gear from common spikes and surges, as well as its standard-level RFI/EMI filtration providing you with clearer sound without pops and crackles.

RECORDING
Reduce the audio artifacts caused by EMI/RFI interference with Furman's standard level filtration, while safeguarding your equipment against surges and spikes with 15A of power and nine outlets to meet your needs.

DJ EQUIPMENT
Bars, clubs and other event venues have some of the worst power out there - from air compressors turning on and off to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig. Furman's standard level protection and filtration keeps the bad stuff out.

PRO AUDIO
When you're out there gigging, you never know what kind of power you're going to get. The wear and tear on mobile rigs eventually takes it toll - that's why it's smart to plug into Furman's standard level protection and RFI/EMI filtration. It keeps your equipment safe and sounding clean. Whether you're setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust.

Features

• Noise Filtration - AC noise filtering to reduce radio frequency and electromagnetic interference (RFI/EMI)
• Surge Protection - Spike & surge protection ensures equipment stays safe and your power stays clean
• 9 Total Outlets - 8 rear panel outlets and 1 front panel outlet
• 15 Amp Rating - 15 amp rating, with circuit breaker
• "Protection OK" Indicator - Front panel indicator LED lets you know that your equipment is being protected
• Wall Wart Spacing Indicator - Rear outlets have been spaced to accommodate even the bulkiest of wall warts and adapters

Technical Specs

• Maximum Output Current: 15 amps
• Line Cord: 6 ft., captive, 14 AWG, with 3-conductor Edison plug
• Operating Voltage: 120VAC 60Hz
• Spike Protection Mode: Line to neutral
• Energy Dissipation: 170 joules
• Peak Impulse Current: 12,000 amps
• Maximum Continuous Operating Voltage: 130 VAC RMS
• Let Through Voltage (@ 125 amps, 8/20uS waveform) 400 volts
• Noise Attenuation: Transverse mode: Greater than 23dB, 200Khz to 10 Mhz
• Dimensions: 1.75" H x 19" W x 3.75" D
• Weight: 4.9 lbs.
• Safety Agency Listing: cTUVus
• Warranty: Merit Series units are protected by a limited three year warranty covering defects in materials and workmanship.